Steps:
1. To use a wire bending machine, first turn on the power, turn on the key switch on the control panel, and then press the oil pump to start.
2, stroke adjustment, the use of bending machine must pay attention to adjust the stroke, be sure to test run before bending. The upper and lower die of the bending machine must ensure a gap of plate thickness. Otherwise it will damage the mold and the machine. The adjustment of the stroke also has electric quick adjustment and manual fine adjustment.
3, the choice of bending notches, generally choose the slot thickness of 8 times the thickness. If you bend a 4mm sheet, you need to choose a notch of about 32.
4. The backgauge adjustment generally has electric quick adjustment and manual fine adjustment, the method is the same as that of the shearing machine.
5. Press the foot switch to start bending. Different from the shears, the bending machine can be released at any time. When the foot bending machine is released, it stops. Regulations, wear labor protection articles in accordance with regulations;
advantage:
1. The wire bending machine has accurate positioning, high production accuracy, small parts loss, and few wearing parts
2. Fully automatic molding production, one employee can take care of 8 machines at the same time
3. Hoe-type feed to avoid the phenomenon of wire scratches
4. Suitable for products with high surface finish requirements and accurate wire length, customized by the requirements of galvanized wire products
5.Automatic feeding, cutting, forming, pushing, and non-stop production
6. Easy operation, stable quality, fast loading and high production efficiency
7. Simple operation and easy switching. You can choose the appropriate speed according to the material, thread warp, length, and shape of the workpiece being processed.
8. Easy adjustment, only need to change the mold to produce different products, excellent materials and workmanship, high comprehensive performance and long service life
9. Added stepper motor feeding, microcomputer control, make feeding more accurate
